Fiber Optic Wiki

Semiconductor optical amplifier

November 19, 2011

Semiconductor optical amplifiers (SOAs) are amplifiers which use a semiconductor to provide the gain medium. These amplifiers have a similar structure to Fabry–Pérot laser diodes but with anti-reflection design elements at the endfaces. Recent designs include anti-reflective coatings and tilted waveguide and window regions which can reduce endface reflection to less than 0.001%. Since this creates a loss of power from the cavity which is greater than the gain it prevents the amplifier from acting as a laser.

Vertical-cavity SOA

November 19, 2011

A recent addition to the SOA family is the vertical-cavity SOA (VCSOA). These devices are similar in structure to, and share many features with, vertical-cavity surface-emitting lasers (VCSELs). The major difference when comparing VCSOAs and VCSELs is the reduced mirror reflectivities used in the amplifier cavity. With VCSOAs, reduced feedback is necessary to prevent the device from reaching lasing threshold. Due to the extremely short cavity length, and correspondingly thin gain medium, these devices exhibit very low single-pass gain (typically on the order of a few percent) and also a very large free spectral range (FSR).

In a raman amplifier

November 19, 2011

In a Raman amplifier, the signal is intensified by Raman amplification. Unlike the EDFA and SOA the amplification effect is achieved by a nonlinear interaction between the signal and a pump laser within an optical fiber. There are two types of Raman amplifier: distributed and lumped. A distributed Raman amplifier is one in which the transmission fiber is utilised as the gain medium by multiplexing a pump wavelength with signal wavelength, while a lumped Raman amplifier utilises a dedicated, shorter length of fiber to provide amplification.

Description of XFP transceiver

November 19, 2011

The XFP (10 Gigabit Small Form Factor Pluggable) is a standard for transceivers for high-speed computer network and telecommunication links that use optical fiber. It was defined by an industry group in 2002, along with its interface to other electrical components which is called XFI.

A lightguide display

November 18, 2011

A Lightguide display (also known as an edge-lit display) is an obsolete electronic mechanism which was used for displaying alphanumeric characters in electronic devices such as calculators, multimeters, laboratory measurement instruments, and entertainment machines such as pinball games.

A leaky mode

November 18, 2011

A leaky mode or tunneling mode in an optical fiber or other waveguide is a mode having an electric field that decays monotonically for a finite distance in the transverse direction but becomes oscillatory everywhere beyond that finite distance. Such a mode gradually "leaks" out of the waveguide as it travels down it, producing attenuation even if the waveguide is perfect in every respect.

|< < .... 57 58 59 60 61 62 63 64 65 66 67 .... > >|

Showing 367 to 372 of 1106 (185 Pages)