Network booting

For general data storage on an already-booted computer, any type of generic network interface may be used to access iSCSI devices. However, a generic consumer-grade network interface is not able to boot a diskless computer from a remote iSCSI data source. Instead it is commonplace for a server to load its initial operating system from a TFTP server or local boot device, and then use iSCSI for data storage once booting from the local device has finished.

A separate DHCP server may be configured to assist interfaces equipped with network boot capability to be able to boot over iSCSI. In this case the network interface looks for a DHCP server offering a PXE or bootp boot image. This is used to kick off the iSCSI remote boot process, using the booting network interface's MAC address to direct the computer to the correct iSCSI boot target.

Specialized iSCSI interfaces are available with built-in BIOS functionality that allows the interface to be preassigned to an iSCSI target, and be able to boot from it without additional help from a boot server, thereby reducing the network configuration complexity.

July 28, 2011

Continue