HFC 4 ways return path optical receiver

HFC 4 ways return path optical receiver OR2040 series HFC four ways return path receiver can convert upstream optical signal to RF signal at the head-end and remote control center. Four independent receivers integrated into a 1RU 19” casing to supply service for HFC network terminal. Receiver's low noise design, -22dBm receive sensitivity can provide service to farther place.

There are two versions of this receiver. OR2040A with LCD on the front panel, OR2040B without LCD. All receivers are temperature tolerance type cam be installed in any network surroundings including out-door type. Both of these two types can adopt SNMP function which can control the front panel to realize optimization work at the head-end and remote installment.

2.Performance Characteristic
1200~1620nm wider wavelength
4 low noise optical receiver, up to -22dBm receive sensitivity
SNMP network management function option
RF output level can be adjusted by network
Built-in 1+1 backup power, redundant A/B inputs (option)
Good performance of resistance to temperature, allow -40~+65℃ operating temperature
Simple mode, 19” 1RU mount, contain 4 pcs of independent optical receiver
Excellent P/P ratio

June 10, 2011

Continue